APD Billet Enforcer Series Carburetor

Description

The BILLET ENFORCER starts from a custom extruded piece of 6061-T6 aluminum and is produced on a 5-axis machining center. The raised boosters are also machined from 6061-T6 aluminum which allows us to better channel fuel around the entire diameter of the booster. This along with raising the exit point of the fuel in the booster helps to stop fuel slosh out of the on launch, and when going on the throttle stop. Having these parts CNC machined from billet allows us to make any changes necessary without casting limitations. The billet material also adds strength, eliminating warped or broken main bodies. The fully CNC machined main body is hard anodized after machining to eliminate any corrosion problems, and makes far a good looking carburetor for years to come. The throttle shaft bushings are made from oil impregnated bronze to make for smooth throttle transition, and eliminate throttle sticking off idle. The standard 7-9/16 x 5-⅜ hood scoop tray mounting flange is integrated into the carburetor which eliminates the need to run a plate below the carburetor which creates a much cleaner setup. The externally adjustable linkage is Teflon coated, and is made from precision ground steel with tig welded laser cut flanges, making it strong and corrosion free. These features along with our billet metering blocks, billet enforcer large window sight glass bowls, screw on jet extensions, and a notched float, makes this what we believe to be the best value the carburetor industry has seen.